81705 Series Bags and Film

SCS 81705 Series Bags and Film are qualified
to MIL-PRF-81705E Type III, Class 2




81705 Bags



Qualified Stamp

QUALIFICATION

SCS Bags and Film are qualified to MIL-PRF-81705E Type III, Class 2. These products are on the Qualified Product Listing under the Defense Standardization Program. Check our listing here.

81705 Series bags and film are manufactured from four layers - static dissipative coating, polyester, metal and polyethylene laminate. The polyester dielectric in concert with the metal layer provides discharge shielding. The exterior is static dissipative and allows electrostatic charges to be removed when grounded.





CONVERTED BAGS


Standard stock bags are converted per MIL-DTL-117H unless otherwise requested. As such, the bag markings will contain the required MIL-PRF-81705E markings, and also the stamp shown here:


MIL-81705 Bag Identification


If your packaging needs do not include meeting MIL-DTL-117H, bags can be converted from qualified film per your packaging requirements.


 Item No.  Size  Closure  UOM
 81735  3" x 5"  Open  100 per pack
 817Z35  3" x 5"  Zip  100 per pack
 817Z46  4" x 6"  Zip  100 per pack
 81748  4" x 8"  Open  100 per pack
 81755  5" x 5"  Open  100 per pack
 81758  5" x 8"  Open  100 per pack
 81766  6" x 6"  Open  100 per pack
 81768  6" x 8"  Open  100 per pack
 81788  8" x 8"  Open  100 per pack
 817810  8" x 10"  Open  100 per pack
 817Z810  8" x 10"  Zip  100 per pack
 817812  8" x 12"  Open  100 per pack
 817912  9" x 12"  Open  100 per pack
 8171012  10" x 12"  Open  100 per pack
 8171212  12" x 12"  Open  100 per pack
 8171216  12" x 16"  Open  100 per pack
 8171218  12" x 18"  Open  100 per pack
 8171518  15" x 18"  Open  100 per pack
 8171624  16" x 24"  Open  100 per pack
 8171820  18" x 20"  Open  100 per pack
 8171824  18" x 24"  Open  100 per pack
 8172430  24" x 30"  Open  100 per pack




FILM


Film is printed per MIL-PRF-81705E Section 3.6:

MIL-PRF-81705E: 3.6 Identification of material. The barrier material shall have two groups of markings in block form and in machine direction. Group A marking shall state the specification number, type, class, manufacturer's name, manufacturer's designation, month and year of manufacture, lot number and heat sealing conditions (temperature, pressure and dwell time). The letters and figures shall be clear, legible, and shall be not less than ⅛ inch high. Group B markings shall identify the protective qualities of the materials as follows: For type I – EMI/STATIC SHIELD and for type III – STATIC SHIELD. These letters shall be not less than ½ inch high. The two groups of markings on all three types of material shall be either printed using a water-resistant ink or embossed and shall be visible if the material is fabricated into a bag or pouch. The two groups of markings shall be printed or embossed sequentially, complete, and continuous lengthwise with a space of one inch between groups. A complete group of markings shall appear once in each six inches of width of the roll and flat cut.

MIL-81705 Film Identification



 Item No.  Size  UOM
 817R 36X50  36" x 50'  Roll
 817R 36X250  36" x 250'  Roll
 817R 48X250  48" x 250'  Roll




For additional information, please complete the below contact form.

Request a Quote
Company Name:
Name:
Title:
Phone Number:
E-mail Address:
City:
State/Province:
Zip/Postal Code:
Country