PRODUCTS NEEDED FOR YOUR START-UP ESD PROGRAM!

Single-Wire Wrist Straps

Adjustable Wrist Strap, Blue, with 6′ Coil Cord

One size fits all adjustable wrist band with 6ft coil cord, blue band, black coil cord

4mm Snap, 1 megohm resistor

Meets ANSI/ESD S20.20 and ANSI/ESD S1.1

Two Sole - Cup Style Foot Grounder

Heel Grounder with Dual Cup, Rubber, 18″ Conductive Ribbon

Heel cup for use with standard shoes, two-layer rubber composite sole material

Conductive exterior meets required limits of ANSI/ESD S20.20 tested per ESD TR53

18″ Conductive ribbon, one megohm current limiting resistor

Single-Wire Smocks

Smock Jacket with Knitted Cuffs, 3 Pockets, No Collar, Blue, Small

Groundable static control garment system meets ANSI/ESD S20.20 (Rtg < 3.5 x 10⁷ ohms) requirement tested per ANSI/ESD STM2.1 and ESD TR53

Creates faraday cage effect around torso and arms of operator

Hip-To-Cuff grounding - Improves productivity, grounds operator with no need for a cord to be attached to the operator's wrist

Worksurface Mats

R1 Series 2-Layer Rubber Mat Rolls

Provides a worksurface that does not generate a static charge - Controls the discharge rate from all conductors (including ESD susceptible items) that are placed on the surface.

Dissipative Dual Layer Rubber Material

Black side bottom layer - The dedicated conductive layer reduces the resistance to ground (Rtg) from the top of the surface to the groundable point ground and allows the mats to be used with ESD workstation monitors

Charge-Guard™ Wipes

Charge-Guard™ ESD Surface and Mat Cleaner, 25 Wipes

Ideal for use after sanitizing an ESD worksurface with alcohol

Packages in Dri-Shield® 2000 moisture barrier pouch - Removes dust, grease, grime, fingerprints, solder flux and other contaminants from ESD mats and other surfaces

Alcohol-Free Formula - Excessive use of alcohol-based cleaners may dry-out mats (vinyl or rubber) and degrade performance

Bench Ground Cords

Common Ground Cord Kit, 15ft, 10mm Male Snap

15ft Ground cord with 10mm stud snap - compatible with mats that have a 10mm socket snap

Two banana jacks - Provides two grounding points for single-wire wrist straps or carts

#10 Ring terminal at end of ground cart - Allows easy attachment to electrical ground

Wrist Strap and Footwear Testers

Combo Wrist Strap and Footwear Tester with Stand

Tests operator’s resistance loop; wrist strap limits 750 kilohms to 10 megohms; footwear limits 750 kilohms to 100 megohms - Determines that operator’s personal grounding device is functioning correctly

Separate test circuits for wrist straps and foot grounders

Use with single-wire wrist straps

Static Shielding Bags

1000 Series Metal-In Static Shielding bag

Metal-In Film Laminate 0.0028″ thick (2.8mil) - Protects ESD sensitive contents on electrostatic field and electrostatic discharges (ESD)

< nJ Discharge Shielding Energy Limit Test per ANSI/ESD STM11.31 - Meets ANSI/ESD S20.20 and ANSI/ESD S541 requirements for ESD Shielding packaging inside and outside an ESD Protected Area (EPA)