QUALIFICATION
SCS Bags and Film are qualified to MIL-PRF-81705E Type III, Class 2. These products are on the Qualified Product Listing under the Defense Standardization Program.
Check our listing here.
81705 Series bags and film are manufactured from four layers - static dissipative coating, polyester, metal and polyethylene laminate. The polyester dielectric in concert
with the metal layer provides discharge shielding. The exterior is static dissipative and allows electrostatic charges to be removed when grounded.
CONVERTED BAGS
Standard stock bags are converted per MIL-DTL-117H unless otherwise requested. As such, the bag markings will contain the required MIL-PRF-81705E markings, and also the stamp shown here:
If your packaging needs do not include meeting MIL-DTL-117H, bags can be converted from qualified film per your packaging requirements.
| Item No. |
Size |
Closure |
UOM |
| 81735 |
3" x 5" |
Open |
100 per pack |
| 817Z35 |
3" x 5" |
Zip |
100 per pack |
| 817Z46 |
4" x 6" |
Zip |
100 per pack |
| 81748 |
4" x 8" |
Open |
100 per pack |
| 81755 |
5" x 5" |
Open |
100 per pack |
| 81758 |
5" x 8" |
Open |
100 per pack |
| 81766 |
6" x 6" |
Open |
100 per pack |
| 81768 |
6" x 8" |
Open |
100 per pack |
| 81788 |
8" x 8" |
Open |
100 per pack |
| 817810 |
8" x 10" |
Open |
100 per pack |
| 817Z810 |
8" x 10" |
Zip |
100 per pack |
| 817812 |
8" x 12" |
Open |
100 per pack |
| 817912 |
9" x 12" |
Open |
100 per pack |
| 8171012 |
10" x 12" |
Open |
100 per pack |
| 8171212 |
12" x 12" |
Open |
100 per pack |
| 8171216 |
12" x 16" |
Open |
100 per pack |
| 8171218 |
12" x 18" |
Open |
100 per pack |
| 8171518 |
15" x 18" |
Open |
100 per pack |
| 8171624 |
16" x 24" |
Open |
100 per pack |
| 8171820 |
18" x 20" |
Open |
100 per pack |
| 8171824 |
18" x 24" |
Open |
100 per pack |
| 8172430 |
24" x 30" |
Open |
100 per pack |
FILM
Film is printed per MIL-PRF-81705E Section 3.6:
MIL-PRF-81705E: 3.6 Identification of material. The barrier material shall have two groups
of markings in block form and in machine direction. Group A marking shall state the
specification number, type, class, manufacturer's name, manufacturer's designation,
month and year of manufacture, lot number and heat sealing conditions (temperature,
pressure and dwell time). The letters and figures shall be clear, legible, and shall be not
less than ⅛ inch high. Group B markings shall identify the protective qualities of the
materials as follows: For type I – EMI/STATIC SHIELD and for type III – STATIC SHIELD.
These letters shall be not less than ½ inch high. The two groups of markings on all three
types of material shall be either printed using a water-resistant ink or embossed and shall
be visible if the material is fabricated into a bag or pouch. The two groups of markings
shall be printed or embossed sequentially, complete, and continuous lengthwise with a
space of one inch between groups. A complete group of markings shall appear once in
each six inches of width of the roll and flat cut.
For additional information, please complete the below contact form.