• Large OLED Display
  Displays resistance mantissa and exponent, temperature, relative humidity and test voltage
• Internal Memory
  Stores and recalls up to 100 measurements. Captures resistance, temperature, humidity and test voltage.
• Measurement Stability Modes
  Sets the 15-second electrification period for test requirements*
• Digital Compliance Verification Surface Resistance Meter
  Measures resistance point-to-point (Rtt) and resistance-to-ground (Rtg) of worksurfaces, flooring systems, garments, packaging, and other materials in accordance with ESD Association documents: ESD TR53, ANSI/ESD S4.1, ANSI/ESD S7.1, ANSI/ESD STM97.1 and others
• Resistance Range: 1.0 x 10³ to 1.0 x 10¹² Ohms
  Determines if a surface is conductive, dissipative or insulative for ESD control applications in electronics manufacturing or handling environments
• Under Load Test Voltages (10V or 100V ±5%)
  Meets ANSI/ESD S20.20 resistance testing requirements for product qualification and compliance verification
• 770007 Concentric Ring Probe Accessory
  Measures surface resistance per ANSI/ESD STM11.11 and volume resistance per ANSI/ESD STM11.12 of planar material
• 770765 Handheld Electrode Accessory
  Meets resistance measurement requirements of TR53, ANSI/ESD STM97.1 and other documents
• NIST Calibrated with Certificate Included
  Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of SCS products, see Calibration.
• Made in the United States of America
  This item is made and stocked in Chino, CA

*Measurement Stability Modes:
Auto Stabilization enables a 15-second electrification period when the measured resistance is 1 x 10¹⁰ ohms or greater to maintain test accuracy.
Fixed Stabilization complies with ANSI/ESD S4.1 and enables a 15-second electrification period when the measured resistance is 1 x 10⁶ ohms or greater.